Hydraulic press for cabinets
10050L - Hydraulic punching machine
The hydraulic punching machine 10050L has the characteristics and performances in between the small 10035L and the big 10090L. In order to reduce the working time, a stroke regulation allows to cut down the opening between punch and die. This equipment is supplied with protection cover and with an electric security micro switch.
It is not necessary to make a pre-hole. It is designed to operate with a system of axis X-Y shifting on prismatic guides, sleeves and panel supports complete with locking.
Accessories supplied
- 1 x positioning valve (code 9162)
- 1 x punch-holder (code 10101L) for round punches up to Ø 40.5 mm max
- 1 x die holder flange (code 10161) for round dies up to Ø 40.5 mm max, for square dies n mm 26 and rectangular or special dies with max dimensions inscribed within a Ø mm 37
- 2 x set of pullers (code 10141 - 10142) to extract punch from the sheet
- 1 x punch-holder locking ring nut (code 10171).
Specifications
| Max outreach | 500 mm |
|---|---|
| Power | 85 kN |
| Work pressure | 700 bar |
| Round hole achievable | Ø 130 mm |
| Max square hole achievable | 92x92 mm |
| Max rectangular hole achievable | inscribed in Ø 130 mm |
| Light between the punches | 55 mm |
| Length | 1.150 mm |
| Width with reference ruler | 2.120 mm |
| Height | 980 mm |
| Weight | 331 Kg |
| Oil capacity for full stroke | 0.08 lt |
| Stroke | 65 mm |
| Die holder flanges: | 10161, 10162, 10163, 10164, 10165 |
Fill out our contact form for
information and quotes
