IMB Multifor specialises in producing machines and equipment for cutting, punching and bending copper bars that are used in electrical panels. The machines and tools that we manufacture are used to help make the operator's job easier by reducing amount of work needed. For this reason, punches, tools and accessories for TRIS units are also developed by our technical department for specific areas of use. Contact our offices by phone, email or via our contact form to get more information.
9042 TRIS WORK UNIT can be used with all MULTIFOR pumps and control units. It is extremely versatile for its different operations. Our tris unit is made up of :
– a practical tool change-over system.
– a hinged tool frame fully opening, which allows simple introduction and removal of bars.
– a millimetric adjustment on the piston, which regulates the stroke of the tools.
– a protractor for reading the bending angle of the bar (on request).
Once set up, this accessory can repeat the work cycle without checking every time lenghts and angles. These characteristics are patented. In order to achieve the maximum working precision, as well as to save time, the tooling is mounted on a workbench, which has been designed specially to be rational and practical in operation. It has all the necessary adjustments and references in order to position quickly the work pieces, avoiding measurements and engravings.
It has the same characteristics of the Unit 9042 and 9042/AL with horizontally fixed position. Small dimensions, it is lighter and economic. It uses standard tools. It is supplied with 1-meter ruler. Not recommended for punching operations.
Specifications | |
---|---|
Length | 700 mm |
Width | 600 mm |
Height | 500 mm |
Weight | 77 kg |
It has the same characteristics of the Unit 9042. Its cylinder is vertically fixed. USED ONLY FOR CUTTING AND PUNCHING OPERATIONS. It uses the same tools of the TRIS 9042. Small dimensions and weight. It is supplied with 1-meter ruler.
Specifications | |
---|---|
Width | 530 mm |
Full length with ruler | 1310 mm |
Height | 720 mm |
Weight | 67 kg |
It is larger and more powerful than unit 9042. The unit 9046 is recommended for processing large size bars, larger than the standard ones. This unit has a 30 tons cylinder that allows to work bars until 200x20 mm. It is also possible to make special tools for punching four holes in one operation. It is supplied with 1 meter ruler, protection carter and adapters for the use of 9042 standard tools. On request we can realize special punches for specific workings.
Specifications | |
---|---|
Power | 300 kN |
Maximum working pressure | 700 Bar |
Stroke | 65 mm |
Adjustable stroke | 50 mm |
Amount of oil required for full stroke | |
Drills bars up to 15 mm thick | |
Cuts bars up to 160x15 mm | |
Bends bars up to 200x20 mm | |
Length | 1200 mm |
Width | 700 mm |
Height | 520 mm |
Weight | 192 kg |
For specific works or a big production, we have made a special unit which uses two cylinders to avoid unnecessary changes of tools, allowing the realisation of punching and bending with a considerable reduction in time and labour costs.
The cylinders have the same chatacteristics of the Tris Unit 9042.
Specifications | |
---|---|
Length | 940 mm |
Width | 600 mm |
Height | 720 mm |
Weight | 122 Kg |
Made to process bars in close spaces such as in cabins, the 9042 / AL TRIS can be used with MULTIFOR pumps and control units.
It has the same specifications as the 9042, but when placed in a horizontal position it can rotate so that the bar remains stationary in its support surface, taking up less space in the work area.
Specifications | |
---|---|
Power | 200 kN |
Maximum working pressure | 700 Bar |
Stroke | 50 mm |
Adjustable stroke | 40 mm |
Amount of oil required for full stroke | 0.180 lt. |
Length | 850 mm |
Width | 600 mm |
Height | 500 mm |
Weight | 90 kg |
Supplied complete with 1 m ruler and protective casing |
We have created it expressly for small quantities. It differs from our Tris Units with bench for its simplicity and lightness as it has no specific accessories, making it simple and light. Its structure is fixed and it is used in vertical position. We recommend to fix it on a bench or on a working table, in order to have stability. The cylinder has an adjustable run. Bar benders are simplified with only one male
punch supplied with n. 2 female dies of different dimensions for various thicknesses. (Max 10 mm) and different bending radius.
It is supplied complete with bending tools. Tools for cutting and punching are the same of our standard tris unit 9042. It can be used with all our power units present in our Catalogue. Supplied with 1-meter ruler. It has to be connected to our power units present in our catalogue.
Specifications | |
---|---|
General specs | same as 9042 |
Power | 200 kN |
Maximum working pressure | 700 Bar |
Width | 130 mm |
Length | 230 mm |
Height | 610 mm |
Weight | 34 kg |
It can be used with all MULTIFOR pumps and control units. It is particularly practical and handy. It allows the punching of flat and angular bars in difficult positions and on pylons. It is used expecially for connections in transformer cabinets and for electrical switchboards. This tool is very reliable like all our MULTIFOR equipments. On request, we can realize special sizes.
For a correct use of the punches, the operator should not punch bars thicker than the diameter of the same punch. On request, it can be supplied with 90° connector.
Specifications | |
---|---|
Power | 120 kN |
Max working pressure | 700 bar |
Max | 14 mm |
Internal outreach | 30 mm |
External outreach | 20 mm |
Max thickness to be drilled in copper bar | 10 mm |
Length | 270 mm |
Width | 135 mm |
Weight | 90 kg |
Built for bending copper bars in workshops or in site. Thanks to its structure and to its integrated protractor, it works on small and large quantities of bars until 100 mm width. This tool is equipped with 2 female bending tools of different dimension for several thickness andbending radius. It can operate with all our power units included in our catalogue.
Specifications | |
---|---|
Power | 50 kN |
Dimensions | 78x150x190 mm |
Weight | 18 Kg |
Stroke | 50 mm |
Adjustable stroke | 30 mm |
Used for | copper 100x8/ 60x10 mm max. |
Our technical department is available for special projects